If you are an experienced tree surgeon or a green-thumbs sufferer, you probably know how difficult it is to cut through tree roots. One way that professionals keep their hands and arms healthy while performing this seemingly hard process is by learning how to stump grind. Stump grinding, which is also known as root drilling, is the process of removing a section of the tree trunk in order to get to the root ball. By doing this, you will be able to identify and remove the diseased parts of the tree without causing any damage to the rest of the tree.
When performing stump grinding, your task is made even more challenging because you have to be in good physical condition to accomplish this. If you have a hard time with your physical activities, you can always bring along a support person, such as a friend or family member, who has an understanding of tree care to help you out during the procedure. A support person is especially helpful if you have a difficult time with your own weak body motions. You can ask a family member or a friend to stand next to you while cutting the stump, so that you can have someone to assist you in the process.
Another very important tip for stump grinding is to never cut deeper than the diameter of the tree's root ball. When cutting a tree, it is important that you don't cut beyond this depth, because it will cause extensive damage to the tree. Once you have reached this depth, make sure to dig down about a foot into the stump and begin the digging process once again. If you don't want to dig too much, you can always purchase a stump removal tool. This type of tool has a sharp blade that you can use to cut away at the thickest parts of the tree.
Another thing to remember when you are cutting stump roots is to wear protective eye protection and gloves when performing this procedure. It is important to take this step very seriously, because even a small cut on your hand can prove to be quite painful. The first few times that you cut a stump, you may find it a little bit tricky. But, with time and practice, you will get the hang of cutting through this type of material. When cutting, make sure that you always face your stump towards the light source, so that you don't see the dark places underneath. Also, use a cutting blade that is made for this type of work, so that the result is as close to the natural look as possible.
Stump grinding is a common form of tree care. However, you should only cut the tree's roots, and never the tree itself. As soon as you notice the presence of some problem, such as decay or splintering, it is best that you get rid of it right away. This is the most important rule of stump grinding: do not damage the tree in any way. If you accidentally damage the tree, then chances are, you will also damage the stump.
There are many things that you have to consider when you are going to cut the tree. If you are going to use a stump grinder, then you better be sure that you take all the necessary precautions in order to protect the tree. Always make sure that you dig down at least one foot into the ground before cutting, and you need to make sure that the depth is at least three feet. When you are cutting, do not forget to wear thick gloves, and use an assisted lifting technique when moving the stump. By nature, oak trees are sturdy trees, but they can be damaged if you are not careful enough.