How to cut tree limbs and branches depends on a few factors including your skill and the conditions where you will be cutting the branch or tree. There are some general rules of thumb you can follow when learning how to cut tree limbs. You want to make sure that the branch/tree is strong and upright before you cut it so you don't damage the root system of the tree. Also make sure that you wear safety equipment like gloves and a helmet when doing this kind of work.
The best time for tree trimming and branch cutting is when the tree is fairly dormant, particularly in winter. Mainly because with very little movement, the tree has fewer chances of getting damaged and many insect and disease infections because of the cool open forests. The first step in tree trimming is to measure the branches and determine how much space you will need. You will then need to get a good angle and hold the piece of rope or wood that you will use for the cut.
You should always start trimming at the tip, but never cut too far to the side or off center. The middle of the piece of wood that you are using should be good enough for cutting tree limbs. You can get higher angles for bigger pieces of wood by raising the height of the rope or wood that you will be using. When you are learning how to cut tree limbs, safety tips are crucial so remember to always keep these tips in mind.
When cutting tree branches off of power lines or tall buildings, make sure you are safe. If there are multiple people or animals that are around, you can back away slowly while keeping one foot behind the piece of wood or rope. You can also have someone guide you if you are not comfortable doing it alone. When you are cutting power lines or trees that are on higher platforms, make sure that you have someone who is trained to work with power lines in order to make sure that you don't lose your balance and fall.
Your first step when you learn how to cut a tree with an electric saw is to make sure that you are in good physical condition. If you are not used to having an electric saw, it may take some practice before you get the feel of it. When cutting branches off of power lines, it is important to make sure that there are no people or animals around. Using the safety guidelines above, if there are any animals or people near the area, make sure that they move away while you are cutting the branch.
A third safety tip when cutting a branch off of a tree with a pole saw is to slow down while lowering yourself down. If you try to go faster, you could cause yourself to fall. It will take more time for you to get used to having the electric pole saw and to lower yourself down safely. Once you learn how to do it properly, you will never have a reason to be afraid of trying it out on a tree again.