Many people are looking at falling trees and wonder how to fell a tree against the lean. Falling trees and lean are not one and the same thing, especially when you are in a hurry or if you do not know what you are doing. When you see a tree ahead of you or in your path that is leaning against the lean, then do not take the step to cut it. There are two things to consider when cutting a tree.
First of all, it is important that you remember to use the correct tool for felling a tree against the lean. To begin with, you need to be sure that you have the proper tree saw. It is also necessary to have the proper angle. Remember that a tree that is leaning against the edge of a lean can very well break free as it hits the ground. If you have an improper angle when you are cutting, the result can be disastrous. Therefore, it is very important that you have a little knowledge about how to fell a tree against the lean before you cut at it.
Once you have the proper tools and angle, the next step to fell a tree against the lean is to identify the direction that the tree is leaning. In order to do this you will need to find yourself a good distance away from the tree that you want to fell. Using a ruler, measure the distance from the top of the tree to where you will be standing when you cut it. This is usually called the 'ording'. The 'ording' is a measurement that tells you how far the tree will break from the lean when you cut at it.
When you get close enough to the tree you can then start to cut it. When cutting the tree, make sure that you wear ear, eye and mouth protection so that you do not get bit. Using a chainsaw has many advantages. It is one of the safest way to fell a tree. It is also the cheapest way to go.
The basic technique of how to fell a tree against the lean is very simple and straightforward. You just have to start the chainsaw in the middle of the tree, right at the notch where the branch breaks off from the tree. Then you have to drive the wedges through the notch and through the branch that is opposite of the one you started with. It is important to have the chainsaw positioned correctly so that the drive wedges hit the right spot and do the job they are supposed to do. If you do not have a proper stance or are holding something incorrectly when you start the process, you could miss your target and accidentally slash another branch instead.
This is why it is better to hire a professional chainsaw driver than doing it yourself. When you are working on the tree by yourself, chances are that you are not going to get the best job possible. A professional operator will take note of the type of tree you have as well as the size and kind of branch that stands in front of the lean. They will also keep a safe distance from the tree and do the felling safely.